[ Air Filters ] [ Aluminum Heads ] [ Blowers ] [ Stud and Bolt ] [ Camshafts ] [ Competition Cams Brand Name Cams ] [ Cap and Wires ] [ Classified Ads Page ] [ Carburetors ] [ Cast Blocks ] [ Fuel Cells ] [ Cast Heads ] [ Clutches ] [ Computers ] [ Con Rods ] [ Consultation ] [ Torque Converters ] [ Forged Crankshafts ] [ Gears Axles Differentials ] [ Disclaimer ] [ Simulator ] [ Marine ] [ Street Car ] [ Home ] [ Customers ] [ Biography ] [ Engine Concepts Page ] [ Street ] [ News ] [ Links ] [ Sales Page ] [ Main Contents ] [ Support ] [ Class Specs ] [ Stockers ] [ Graphics ] [ Dragsters ] [ Pulling Tractors ] [ Projects ] [ Ignition Distrib ] [ Events Page ] [ Driveshafts ] [ Engine Assembly ] [ Fuel Injection ] [ Headers ] [ Engine kits ] [ Machine Shop ] [ Intakes ] [ Main Caps ] [ Nitrous ] [ Pistons ] [ Porting ] [ Pulleys ] [ Safety ] [ ComputerSim ] [ Starters ] [ Timing Sets ] [ Trans ] [ ValveTrain ] [ Merlin Crated Racing Engines & Parts/Supplies www.racingengines.com ] [ World Products Merlin Crate Engine Limited Warranty ]
On Line Performance Parts
Distributors
Accel
Blueprint Performance
Mallory
MSD Distributors
MSD makes a full line of billet
racing distributors for the most demanding racer. Their quality and craftsmanship
shows up as being one of the most sought after performance product lines in the
aftermarket automotive ignition industry.
MSD Distributors & Accessories
- Pro Billet Chevy Ready to-Run (Mech.
Tach version also available) CARB Approved
- Pro Billet Chevy V8 Street (Magnetic
Trigger) CARB Approved
- Pro Billet GM HEI (Also available in
External Coil configuration) CARB Approved
- Pro Billet CNC Chevy V8
- Pro Billet with Slip Collars Chevy
V8 (Extra Tall and Tach Drive Versions Available)
- Pro Billet Locked Out Chevy V8
- Chevy V8 Small diameter (Designed
for those with space limitations)
- Chevy Corvette Pro Billet Tach Drive
with Vacuum Advance
- Billet Ford V8
- Small Diameter Pro Billet Ford
- Pro Billet Ford FE Distributor
- Ford SVO 4.5L, 5L, V6 Pro Billet
Distributor
- Ford 2.3L Billet Distributor
- Chrysler V8 Billet (for
273-318-340-360 Magnetic Trigger)
- Chrysler Pro Billet (available in
either 383-400 or 440-426)
- Buick V6 Billet (V6 90 degree Even
fire, with or with/out advance)
- Buick V8 Pro Billet (400-430-455 Big
Block Magnetic Trigger or 215-300-340-350 Small Block V8)
- Pontiac Super Duty Billet 4Cyl 151
CID Magnetic Trigger
- Pontiac Pro Billet
(326-350-89-400-421-428-455 V8)
- Pro Billet Oldsmobile
(260-307-330-350-400-403-425-455 V8)
- VW Billet Type I (VW Air Cooled)
Distributor (Magnetic Trigger)
- MSD V8 distributor Head (for
replacement of magneto head on Mallory Super mag II,III,IV and sprint magnetos, use with
MSD 6,7,8,&10 Series Ignitions and MSD timing computer)
- Pro Billed dist. Base with Dual
Magnetic Pickup (dual pick up with 2 or 4 degree secondary retard)
- MSD Unitized Ignition
Module (For MSD discontinued Extra Duty Distributors 8282,8460,8461,and 8496)
- MSD Cap Adapts (Fixed or adjustable
rotor)
- MSD Ford V8 Cap Kit
- MSD HEI Dust Cover (Use with
external coil for HEI Distributors)
- Distributor Caps
- Distributor Rotors
- GM Racing Rotors
- 1 Piece fixed rotor for MSD 8445 or
8420 Cap A Dapt
- Chevy and Buick Distributor Gears
(Iron, Steel, Bronze and oversize)
- Ford, Pontiac and Oldsmobile
Distributor Gears (Iron, Steel, Bronze and oversize)
- MSD Vacuum Advance Mechanism
- MSD Vacuum Advance Lockout
- Billet Reluctor
- Magnetic Pickup Assembly (either
MSD/GM Cast Housing or MSD Billet/Pro-billet distributors)
- Chevy Distributor Hold down Clamp
(V8 & V6)
- Advance Kits
- Low Resistance HEI Bushing ( a must
for high cap discharge ignition systems)
- Tach Drive Adapter (tang to square
drive)
MSD Crank Trigger Distributors
MSD Crank Trigger Distributors
require a crank trigger system (see below) for use. These distributors have no
magnetic pickup or advance assemblies.
- Chevy V8 Low Profile Crank Trigger
(Tall block version also available)
- Chevy V8Low Profile Billet
Crank Trigger with Tach Drive
- Chevy V8 Crab Cap (Super Tall Block
version also available)
- Low Profile GM DRCE Block
- Buick V6 Crank Trigger Even Fire
- Low Profile for Ford's Bob Gliden
Block
- Ford V8 Low Profile
-
- MSD V8 distributor Head (for
replacement of magneto head on Mallory Super mag II,III,IV and sprint magnetos, use with
MSD 6,7,8,&10 Series Ignitions and MSD timing computer and crank trigger system)
MSD Flying Magnet Crank Triggers
and Kits
- SB Chevy 6.25" Dia
- SB Chevy 7" Balancer
- SB Chevy 8" Balancer
- BB Chevy
- Buick V6
- SB Chrysler
- BB Chrysler
- SB Ford 289-302
- BB Ford (except Cleveland Block)
- Ford FE Engines
- Pontiac V8
- Flywheel Trigger Ignition systems
(call for applications and availability)
MSD GM HEI Upgrade Ignitions
- MSD Super HEI Kit (MSD 6a or 6al
Ignition with Blaster 2 Coil, Coil Wire, HEI Dust Cover and Coil Bracket)
- MSD HEI Distributor Kit (MSD HEI
Distributor, 2 Diff. Caps and Rotors, Blaster 2 Coil, Coil Wire and Bracket)
- MSD GM High Energy Module/Unitized
HEI Coil (best when used together in stock HEI Distributor)
MSD GM HEI Upgrade Ignitions
- MSD Super HEI Kit (MSD 6a or 6al
Ignition with Blaster 2 Coil, Coil Wire, HEI Dust Cover and Coil Bracket)
- MSD HEI Distributor Kit (MSD HEI
Distributor, 2 Diff. Caps and Rotors, Blaster 2 Coil, Coil Wire and Bracket)
- MSD GM High Energy Module/Unitized
HEI Coil (best when used together in stock HEI Distributor)
MSD
Computerized Ignitions
MSD Pro Mag systems
Magneto systems for demanding
racers who don't want to worry about points batteries or having the proper charging
system, also mandatory for certain aircraft. Consists of generator and electronic
points box, comes in two different systems, the pro mag 12 and the pro mag 44. Generator
housings come in Chevrolet, Ford and Band Clamp mounts. Additional components
available to complete MSD Pro Mag system, call for details and technical advice.
- Pro Mag 12 for gas and alcohol
engines
- Pro Mag 44 for Nitro burning engines
Coils
Manufacturers
Accell
Mallory
MSD Blaster Coils
- MSD Blaster 2 (Stock Points Ignition
Coil with ballast resistor, available in red or chrome)
- MSD Ignition/Late Model Applications
Blaster 2, 2F (Ford), or Blaster 3 (Tall Tower)
- MSD High Vibration Coil (Use with
MSD 5, 6 or 7 Series Ignitions in harsh conditions)
- MSD HEI Coil (GM HEI Distributor
replacement, best used with MSD HEI Module)
- MSD Pro Power Coil (Best for short
duration racing, Use with MSD 7,8 or 10 Series Ignitions)
MSD Coil Accessories
- Coil Wire (Heli Core or Super
Conductor)
- Firewall Feed-Thru (Allows ignition
system to be placed inside vehicle for increased dependability and life)
- Automatic Coil Selector and Tach
Splitter (Allows for two ignition systems, Primary and Secondary, to be used together)
- MSD Coil Wire Retainer (stops coil
wires from coming loose from the coil tower)
- Chrome Coil Bracket (Universal fit
for coils up to 2 1/4" Dia)
- Billet Coil Mount for MSD Pro Power
Coil (allows easier mounting for MSD Pro Power Coil)
There have been
Hits on this page
Racingengines.com
Onlineperformanceparts.com
LaPouttre Racing Heads / Engines
108 Braddock St.
Bay City, MI. 48708
Orders/Tech
Line 989-893-5028
Email
Sales@racingengines.com